Review: Yamaha F60CEHTL outboard motor

By: Andrew Norton

Presented by
  • Trade-A-Boat

The Yamaha F60CEHTL outboard motor can’t be beaten for mid-range top ender tinnies.

Review: Yamaha F60CEHTL outboard motor
The Yamaha F60CEHTL is an economical outboard engine. Engine Man reckons it's the logical low-emission choice for top ender tinnies up to 4.8m.

 

Originally published in TrailerBoat #268, April / May 2011.

I spent seven years reviewing the Yamaha F60C outboard on various hulls before I finally got around to trying the tiller-steer version — but it was worth it because its brilliant multifunction tiller arm makes it a superb engine for open tinnies to 4.8m.

 

YAMAHA F60CEHTL OUTBOARD MOTOR

I described the tiller arm a while back when I reviewed the Yamaha F40F (basically a three-cylinder version of the Yamaha F60C). The tiller arm incorporates an upfront gearshift, ignition key switch, variable trolling rpm control, warning lights for low oil pressure and engine overheat, and a trim/tilt switch that’s separate from the twistgrip throttle.

This design is very important for user-friendliness because, regardless of the throttle opening, the switch stays in the same plane with the logical push down for trim-in and push up for trim-up. On a competing 60 model the tiller-mounted trim/tilt switch changes plane according to the angle of the twistgrip throttle. This means that when the throttle is opened well out, the switch function changes direction, with trim-down being up and vice versa. Understandably this can get
very confusing.

Another design aspect of the F60CEHTL outboard motor is the relatively small gearcase. Again, the competitor’s 60 has a large gearcase with massive gear ratio. When the leg is trimmed in to plane the hull, the torque steer from this large-diameter prop is enormous as it tries to wrench your arm off. With this engine, only when the trim is neutral or slightly out does the torque steer disappear.

Even Yamaha’s Enduro 60, with its 2.33:1 gear ratio, has this problem, so Yamaha sensibly offers only the small gear ratio Yamaha F60C in tiller-steer versions. The 2.33:1 ratio FT60D is available only in remote control versions, where the prop steer torque is countered by the mechanical wheel steering.

 

Boat engines

More boat engine reviews


Find marine engines for sale.


 

ON THE WATER

The review Yamaha F60C outboard was perfectly matched to my hefty plate-sided test hull — a Blue Fin Trooper 475 top-ender style tinnie spinning a 13in pitch alloy prop.

As with every Yamaha F60C I’ve tested before, the review engine started instantly hot or cold, didn’t blow oil smoke at any time and had the smooth idling that only the in-line four-cylinder four-strokes in this power range can provide.

Mid-range fuel efficiency is where four-strokes always score over comparable-output DFI two-strokes, losing out only at trolling rpm. No prop ventilation occurred in full-lock figure of eight turns at wide open throttle (WOT), quite surprising for a hull with a long keel.

With the leg trim out just to the point of prop blowout, the WOT averages were 27.0kts (50.1kmh) and 5650rpm using 19.2lt/h, where the engine was so quiet we could conduct a normal conversation.

 

SERVICING AND MAINTENANCE

Powerhead access on the F60C is very good with the canister oil filter and spark plugs easily reached. Although it has a belt-driven camshaft, the belt has a designed lifespan of 1000 running hours. The engine is a non-interference type so the valves won’t contact the piston crowns if the belt breaks.

Yamaha recommends servicing the F60C every 100 hours or annually after the first service at 20 hours. However, if you do a lot of trolling operation between services I recommend changing the sump oil and filter every 50 hours or six months.

 

YAMAHA F60C PRICE

Yamaha has done an excellent job of providing anglers with a fuel efficient, quiet and user-friendly 60 that in my opinion is the logical low-emission choice for top ender tinnies to 4.8m. The warranty coverage for recreational usage is four years. Recommended retail price is $9288. Spare alloy props cost $158.

 

COMPETING OUTBOARDS

 

Mercury F60

PRICE

$9000

CYLINDERS

4

WEIGHT

117kg

WARRANTY

5 years

OEDA

3 stars

 

YAMAHA F60CEHTL PERFORMANCE

SPEED

RPM

FUEL CONSUMPTION

2.3kts (4.4kmh)

700rpm

0.7lt/h (trolling)

11.9kts (22.1kmh)

3600rpm (clean plane)

--

16.9kts (31.4kmh)

4000 rpm

7.7lt/h (cruising quietly)

27.0kts (50.1kmh)

5650rpm

19.2lt/h (WOT)

 

Originally published in TrailerBoat #268, April / May 2011. Why not subscribe today?

 


Want the latest stories delivered straight to your inbox? Sign up for the free TradeBoats e-newsletter.